Augmented EMEO

We have completed our augmented EMEO project. While we had previously modified the EMEO digital saxophone, this iteration focused on enhancing functionality and reducing overall weight through the use of a 3D-printed bell.

Key upgrades include the addition of a bite sensor (sending MIDI CC 1) and a lip switch (MIDI CC 21) for expressive techniques such as growling, pitch bending, and portamento (MIDI CC 5). We also integrated an extra MIDI button, which can be assigned to functions such as MIDI transposition or toggling a backing track, etc.

Additionally, we installed a MIDI switch beneath EMEO’s original octave keys, which can be programmed to shift octaves—extending the instrument’s playable range to three full octaves.

All additional MIDI signals are seamlessly merged with the EMEO’s original MIDI output and routed through a standard 5-pin DIN MIDI port. This allows for flexible connectivity options, including the use of wireless solutions such as the CME WIDI Master (Bluetooth MIDI) or the Panda MIDI (Wi-Fi MIDI) transmitter. Traditional MIDI cables can also be used for a wired setup. The entire system is powered by an external power bank, ensuring portability and uninterrupted performance.

We offer customization services and will tailor each customer's EMEO to meet their specific requirements.

Model S/N GFE-01-MS : total weight 5.4 pounds

• powered by an external power bank (10,000mAh)

Prior to ordering, please review the purchase agreement. The buyer must sign the form when ordering this modification.

iSaxLab.com Purchase Agreement

Item:  Augmented EMEO kit – S/N GFE-01

1. Product Description

The Buyer is purchasing an augmentation kit for the EMEO digital saxophone, customized by iSaxLab.com, and is requesting professional installation of the kit on their EMEO instrument. This modification enhances the original instrument’s functionality by adding various MIDI control capabilities, enabling greater expression modulation of the sound source and allowing for further customization through MIDI software.

2. Important Disclosures

•   This is a hand-crafted, modified instrument kit that incorporates custom-designed hardware and/or software enhancements by iSaxLab.com.

• During the installation process, we may use small external screws, adhesive tapes or permanent adhesive to securely mount parts on the outside of the instrument. However, no internal components or systems of the original instrument are altered.

• The modification enables enhanced MIDI mapping and control capabilities, which require the user to have a basic to intermediate understanding of MIDI, particularly in MIDI mapping.

• The modified instrument is best utilized with customizable software instruments or sound modules, such as those offered by Audio Modeling (SWAM engine), although compatibility with other platforms is possible with midi software or DAW.

• Our custom modification kits are produced using 3D printing technology. While carefully designed, 3D-printed parts can be vulnerable to damage from excessive pressure, bending, or physical impact. Therefore, buyers must handle and store the instrument with care. iSaxLab.com is not responsible for any damage resulting from failure to follow these precautions.

3. Setup and Support

• A MIDI setup guide will be provided to assist the Buyer in configuring MIDI parameters specific to our modified instruments.

• Ongoing user support will be provided for:

  • MIDI setup guidance

  • Troubleshooting instrument operation

  • Minor repair consultations

    
    

If a major  repair is required:

• iSaxLab.com will only charge the cost of replacement parts and shipping fees.

• The Buyer is responsible for shipping the instrument to and from the service location.

  
  

4. Disclaimer and Limitations

• iSaxLab.com and Min Song are not responsible for any issues or malfunctions related to the original (unmodified) components of the base instrument.(EMEO)

• All modifications are performed with care and attention to detail; however, due to the nature of the handmade customization, each unit may have slight variations.

  
  

5. No Return / No Refund Policy

Due to the highly customized and handcrafted nature of these modified instruments, all sales are final.

• No returns or refunds will be accepted after purchase, regardless of the reason.

  
  

6. Buyer Consent and Acknowledgment

By signing below, the Buyer

- Affirms that they:

• Understand the nature of the modified instrument and the technical requirements for its optimal use.

• The use of external mounting methods (e.g., screws, tapes or adhesive)

• The care required for 3D-printed components

• The need for MIDI knowledge to operate the instrument effectively

• Acknowledge the no-return, no-refund policy.

• Accept that support for original instrument malfunctions is not the responsibility of iSaxLab.com.

  
  

- Consent to the terms of purchase as outlined in this agreement.